If you'd like to take our DVR system for a test drive this is the definitely the track to take. From this live demo you'll be able to see how our system works and how functional and flexible it can be for your security needs.

1. To begin your session click the "GO NOW" link at the bottom of the page. You will be immediatly taken to a screen similar to figure 1.0 to the right. If it isn't already selected for you, choose "Mpeg4 Encoder Viewer". Then click SUBMIT.

2. Next you'll be prompted to select your internet connection type. If you're logging on via dial-up your window mode selection will default to "1 Window". If you're on CABLE/DSL/T1 you'll have the opportunity to select either "1 Window", '2 Windows", or "Multi-View". To get the full effect we recommend selecting "Multi-View". (see figure 1.1)

3. Finally you'll either see a screen prompting you to install the Codec Compression plug-in. If you already have the Codec installed on your system you will be taken to a screen that shows the the progress of your system loading the video. (see figure 1.2) If you do not have the Codec installed on your system you will have to allow it to install to be able to continue with the demo.

4. Once the Codec loads you will be prompted for a username and password. To keep it simple the username and password are both dvr1 .

5. After entering this information a new window will open with the screen configuration you chose. Typically at least one of the cameras will be available for demonstration viewing. To see just how "real-time" our system is that camera will be directed towards one of our clocks.

GO NOW